No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

OceanStor 9000 V5 7.0 Command Reference 03

Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
change rabbitmqcfg

change rabbitmqcfg

Function

The change rabbitmqcfg command is used to modify the configuration of RabbitMQ.

Format

change rabbitmqcfg <host_ip> <rmq_user> <vhost> <header> <routing_key> [exchange=?] [name=?] [port=?]

Parameters

Parameter

Description

Value

host_ip IP address of the RabbitMQ server.

IPv4 or IPv6.

rmq_user User name of the RabbitMQ server.

The value contains 1 to 64 characters.

vhost vhost (access range) of the RabbitMQ server.

The value contains 1 to 64 characters.

header A field of the packet header of PayloadSingle protocolbuffer.

The value contains 1 to 64 characters.

routing_key routingKey (queue name) of the RabbitMQ server.

The value contains 1 to 64 characters.

password Password of the RabbitMQ server.

The value contains 1 to 64 characters.

exchange exchange of the RabbitMQ server.

The value contains 1 to 64 characters.

name name.

The value contains 1 to 64 characters.

port Port number of the RabbitMQ server (5672 by default).

The value ranges from 1024 to 65535.

Level

Device administrator

Usage Guidelines

The device administrator can also run this command to modify the configuration of RabbitMQ.

Example

Modifying the configuration of RabbitMQ.

admin:/>change rabbitmqcfg 192.168.0.100 user vhost header routingkey 
Please input password:*******
Command executed successfully.

System Response

None

Translation
Download
Updated: 2019-05-07

Document ID: EDOC1100067955

Views: 25304

Downloads: 7

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next