No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

OceanStor 9000 V5 7.0 Command Reference 03

Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
show disk destroy_data_switch

show disk destroy_data_switch

Function

The show disk destroy_data_switch command is used to query the status of the secure data erasing function when the disk is kicked out of the system.

Format

show disk destroy_data_switch

Parameters

None

Level

Administrator

Usage Guidelines

None

Example

Query the status of the secure data erasing function when the disk is kicked out of the system.

admin:/>show disk destroy_data_switch
 
  Switch_status : on

System Response

The following table describes the parameter meanings.

Parameter

Meaning

Switch_status

Switch status.

Translation
Download
Updated: 2019-05-07

Document ID: EDOC1100067955

Views: 25254

Downloads: 7

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next