No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

OceanStor 9000 V5 7.0 Command Reference 03

Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
show system service

show system service

Function

The show system service command is used to query service state.

Format

show system service < service_name >

Parameters

Parameter

Description

Value

service_name System service name.

The value is "front_port_check".

Level

Resource administrator

Usage Guidelines

None

Example

To query service state, run the following command:

admin:/>show system service front_port_check 
 
  ServiceName       ServiceStatus   
  ----------------  -------------   
  FRONT_PORT_CHECK  running

System Response

The following table describes the parameter meanings.

Parameter

Meaning

ServiceName

Name of the system service.

ServiceStatus

State of the system service.

Translation
Download
Updated: 2019-05-07

Document ID: EDOC1100067955

Views: 24823

Downloads: 7

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next