No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

OceanStor 9000 V5 7.0 Command Reference 03

Rate and give feedback :
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
create iprule

create iprule

Function

The create iprule command is used to create IP rules. Only the IP addresses specified in the rule can access the snas_cm process.

Format

create iprule < secureIP >

Parameters

Parameter

Description

Value

secureIP IP address whitelist.

Only the IP addresses in the whitelist can access the snas_cm process.

The value is 1 to 32 characters in length. Enter one or more IP addresses. If you enter more than one IP addresses, the format is ip-ip. For example, 192.168.0.1 or 192.168.0.2-192.168.0.5.

Level

Super administrator

Usage Guidelines

None

Example

Create IP rules.

admin:/>create iprule 192.168.3.3
Command executed successfully.

System Response

None

Translation
Download
Updated: 2019-05-07

Document ID: EDOC1100067955

Views: 24187

Downloads: 7

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next