No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

OceanStor 9000 V5 7.0 Command Reference 03

Rate and give feedback :
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
change remote_replication zone

change remote_replication zone

Function

The change remote_replication zone command is used to modify remote replication zone.

Format

change remote_replication zone <id> [ip_range=? ] [exclude_ip=?] [name=?] [subnet_id=?]

Parameters

Parameter

Description

Value

id ID of remote replication zone.

The value is a combination of numbers and is 1 to 128 characters in length.

ip_range Included IP segment in remote replication zone.

The number of IP segment is 1 to 16, and each IP in an IP segment is insided of the single quote mark. IP segments are separated by comma(,). For example:'192.168.10.100'-'192.168.10.110','192.168.10.200'-'192.168.10.230'.

exclude_ip Excluded IP in remote replication zone.

The number of IP is 1 to 16, and each IP is insided of the single quote mark.IPs are separated by comma(,). For example:'192.168.10.100','192.168.10.110'.

name Name of remote replication zone.

The value is a combination of numbers, letters, hyphens (-), dot (.), and underscores (_) and is 1 to 31 characters in length.

subnet_id Subnet ID.

The value is a combination of numbers, letters, hyphens (-), dot (.), and underscores (_) and is 1 to 128 characters in length.

Level

Resource administrator

Usage Guidelines

None

Example

Modify the remote replication zone.

admin:/>change remote_replication zone 1 ip_range='192.168.20.55'-'192.168.20.75'
exclude_ip='192.168.20.45' name=assaasd subnet_id=1
Command executed successfully.

System Response

None

Translation
Download
Updated: 2019-05-07

Document ID: EDOC1100067955

Views: 24689

Downloads: 7

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next