No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

OceanStor 9000 V5 7.0 Command Reference 03

Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
move infoequalizer ippool

move infoequalizer ippool

Function

The move infoequalizer ippool command is used to move an IP address in the IP address pool of a protocol cluster.

Format

move infoequalizer ippool <ippool_id> <node_name>

Parameters

Parameter

Description

Value

ippool_id IP address pool ID.

The value can only contain 1 to 127 digits.

You can press "Ctrl+A" to view the available values of "ippool_id".

node_name Node name.

The value contains 1 to 15 letters, digits and hyphens (-).

You can press "Ctrl+A" to view the available values of "node_name".

Level

Device administrator

Usage Guidelines

None

Example

Move an IP address in the IP address pool of a protocol cluster.

admin:/>move infoequalizer ippool 2 Node001
Command executed successfully.

System Response

None

Translation
Download
Updated: 2019-05-07

Document ID: EDOC1100067955

Views: 24829

Downloads: 7

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next