No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

OceanStor 9000 V5 7.0 Command Reference 04

Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
change inforevive

change inforevive

Function

The change inforevive command is used to modify InfoRevive parameters.

Format

change inforevive [ switch=? ] < rw_mode >

Parameters

Parameter

Description

Value

switch Status.

The value is "open" or "close".

rw_mode Permission.
  • When "Switch" is set to "open", set the value to "ro" or "rw".
  • When "Switch" is set to "close", you cannot sepcify the value.

Level

Administrator

Usage Guidelines

You can specify "rw_mode" only when "Switch" is set to "open".

Example

Enable InfoRevive and set permission.

admin:/>change inforevive switch=open rw 
Command executed successfully.

System Response

None

Download
Updated: 2019-07-25

Document ID: EDOC1100067955

Views: 27478

Downloads: 7

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next