No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

OceanStor 9000 V5 7.0 Command Reference 03

Rate and give feedback :
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
change node custom

change node custom

Function

The change node custom command is used to modify the configuration of a node connected to a third party.

Format

change node custom <node_id> [dataunitIp=?] [dataunitcount=?] [isExitPlatform=?] [node_name=?] [slotModel=?] [slotType=?]

Parameters

Parameter

Description

Value

dataunitIp IP address of a node connected to a third-party platform.

The value is a character string in the format of an IPv4 address, such as 52.1.62.7.

dataunitcount Node registration number.

The value is a string of 1 to 127 characters, including letters, digits, hyphens (-), underscores (_), # and %.

isExitPlatform Identifier of deregistering a node.

LogOff(0): log on.

LogOn(1): log off.

slotType Encoding mode of a slot.

Character string, indicating the direction of the disk code.

SXZY: From top to bottom and from left to right;

SXZYS: From top to bottom, from left to right, like an "S";

XSZY: From bottom to top and from left to right;

XSZYS: From bottom to top, from left to right, like an "S";

ZYSX: From left to right and from top to bottom;

ZYSXS: From left to right and from top to bottom, like an "S";

ZYXS: From left to right and from top to bottom;

ZYXSS: From left to right and from top to bottom, like an "S".

slotModel Slot scale.

The value is a string, including digits, 'X', and underscores (_), such as 25X1, 3X4_5X4.

node_name Node alias.

The value is a string of 1 to 127 characters, including letters, digits, hyphens (-), underscores (_), and periods (.).

Level

Super administrator

Usage Guidelines

None

Example

The command is used to modify the configuration of a node connected to a third party.

admin:/>change node custom 18433 dataunitIp=52.1.62.80 dataunitcount=111 isExitPlatform=LogOn
Command executed successfully.

System Response

None

Translation
Download
Updated: 2019-05-07

Document ID: EDOC1100067955

Views: 24170

Downloads: 7

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next