No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

OceanStor 9000 V5 7.0 Command Reference 04

Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
change balancepolicy

change balancepolicy

Function

The change balancepolicy command is used to modify the status of balance switch.

Format

change balancepolicy <status>

Parameters

Parameter

Description

Value

status Balance switch.

open:turn on the balance switch.

close:turn off the balance switch.

Level

Resource administrator

Usage Guidelines

None

Example

Change the status of the balance switch.

admin:/>change balancepolicy close
WARNING: You are about to modify the balancing policy. This operation causes data to be unevenly distributed on nodes and disks, affecting read and write performance. Suggestion: Before performing this operation, ensure that the preceding risk is acceptable.
Have you read warning message carefully?(y/n)y
 
Are you sure you want to perform the operation?(y/n)y
Command executed successfully.

System Response

None

Download
Updated: 2019-07-25

Document ID: EDOC1100067955

Views: 27500

Downloads: 7

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next