No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

OceanStor 9000 V5 7.0 Command Reference 03

Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
show directory_share nfs_auth_client all

show directory_share nfs_auth_client all

Function

The show directory_share nfs_auth_client all command is used to query information about Network File System (NFS) share client.

Format

show directory_share nfs_auth_client all [ name=? ] [ share_path=? ]

Parameters

Parameter

Description

Value

name Name of the NFS share client.

The NFS share client is the name of the client host, IP address of the client, or name of the network group. The network group name starts with @ and contains 1 to 256 letters, digits, periods (.), underscores (_),and hyphens (-). The host name must meet the following requirements:

  • Contains 1 to 256 letters, digits, hyphens (-), and periods (.).
  • Must start with a letter or digit and cannot end with a hyphen (-).
  • Cannot contain consecutive periods (.) or only digits.
The IP address must meet the following requirements:
  • You can enter a single client IP address or a client IP address segment, or use asterisk (*) to represent all client IP addresses.
  • You can enter IPv4, IPv6 or their mixed IP address.
share_path Share path.

The value contains 1 to 1024 characters.

Level

Resource administrator

Usage Guidelines

Read-only users can also run this command to view information.

Example

Query information about Network File System share client.

admin:/>show directory_share nfs_auth_client all 
 
  ID  Name         SharePath    AccessVal  Sync  AllSquash      RootSquash   
  --  -----------  -----------  ---------  ----  -------------  -----------  
  1   *            /cifs_share  ro         sync  no_all_squash  root_squash  
  2   192.168.1.1  /nfs_share   ro         sync  no_all_squash  root_squash  
  3   192.168.1.2  /nfs_share   ro         sync  no_all_squash  root_squash  
  4   192.168.1.1  /cifs_share  ro         sync  no_all_squash  root_squash

System Response

The following table describes the parameter meanings.

Parameter

Meaning

ID

NFS share client ID.

Name

IP address or host name of an NFS share client.

SharePath

Share path.

AccessVal

Access mode.

Sync

Synchronization mode.

AllSquash

Permission constraint.

RootSquash

Root permission constraint.

Translation
Download
Updated: 2019-05-07

Document ID: EDOC1100067955

Views: 25238

Downloads: 7

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next