No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

OceanStor 9000 V5 7.0 Command Reference 03

Rate and give feedback :
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
delete data_reconstruct_configuration

delete data_reconstruct_configuration

Function

The delete data_reconstruct_configuration command is used to delete the configurations of a data reconstruction task.

Format

delete data_reconstruct_configuration < id >

Parameters

Parameter

Description

Value

id Identifier of data reconstruction configuration.

The value contains 1 to 127 letters, digits, hyphens (-), and underscores (_).

Level

Device administrator

Usage Guidelines

None

Example

Delete the configurations of a data reconstruction task.

admin:/>delete data_reconstruct_configuration 1
WARNING: You are about to delete the automatic data recovery policy. After the policy is deleted, the system will recover data based on the default policy. 
Have you read warning message carefully?(y/n)y
 
Are you sure you want to perform the operation?(y/n)y
Command executed successfully.

System Response

None

Translation
Download
Updated: 2019-05-07

Document ID: EDOC1100067955

Views: 24241

Downloads: 7

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next