No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

OceanStor 9000 V5 7.0 Command Reference 03

Rate and give feedback :
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
show ftp share_auth_client all

show ftp share_auth_client all

Function

The show ftp share_auth_client all command is used to query multiple FTP shares.

Format

show ftp share_auth_client all < range > [ userName=? ] [ sharePath=? ] [ sortby=? ] [ sorttype=? ]

Parameters

Parameter

Description

Value

range Result range to display.

The format is XX-YY indicating that XX to YY records will display. If the number of results is smaller than XX, all results display.

userName Share username.

The value is a local username which is also the share name.

The value contains 1 to 31 characters and cannot contain the following characters: "/\[]:;|=,+*?<>@. The value cannot end with a period (.). The userName and sharePath are mutually exclusive.

sharePath Share file path.

The value is 1 to 4000 characters in length and must start with a slash (/).

The sharePath and userName are mutually exclusive.

sortby Sorted by.

The value is "accessName" (userName) or "sharePath".

sorttype Sorting in.

The value is "UP" or "DOWN", where:

  • "UP": ascending oder.
  • "DOWN": descending order.
This parameter can be configured only if "sortby" has been specified.

Level

Resource administrator

Usage Guidelines

Read-only users can also run this command to view information.

Example

Query multiple FTP shares.

admin:/>show ftp share_auth_client all 0-3
 
  userName      : ftp01
  accessID      : ftp01
  sharePath     : /ftp01
  upBandwidth   : 0
  downBandwidth : 0
  permission    : 31
-----------------------------------
  userName      : xiaogeng
  accessID      : xiaogeng
  sharePath     : /ftp01
  upBandwidth   : 0
  downBandwidth : 0
  permission    : 31
-----------------------------------
  userName      : xiaogeng
  accessID      : xiaogeng
  sharePath     : /ftp01
  upBandwidth   : 0
  downBandwidth : 0
  permission    : 31

System Response

The following table describes the parameter meanings.

Parameter

Meaning

userName

Share username.

accessID

Share ID.

sharePath

Share file path.

upBandwidth

The value is an integer between "0" and "409,600" expressed in Kbit/s. If the value is set to "0", there is no limit on the upload bandwidth.

downBandwidth

The value is an integer between "0" and "409,600" expressed in Kbit/s. If the value is set to "0", there is no limit on the download bandwidth.

permission

A 5-bit binary number is used to indicate whether permissions are supported. Such permissions are permissions for directory creation and browse, and file upload,

download, and deletion. The decimal number that corresponds to the binary number ranges from 0 to 31. From the right to left, the digits of the binary number indicate deletion, download, upload, directory and file browse, and directory creation.1 indicates permission enablement, whereas 0 indicates permission disablement.

Translation
Download
Updated: 2019-05-07

Document ID: EDOC1100067955

Views: 24401

Downloads: 7

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next