No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

OceanStor 9000 V5 7.0 Command Reference 03

Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
change system tier

change system tier

Function

The change system tier command is used to modify a tier.

Format

change system tier < tier_id > < name >

Parameters

Parameter

Description

Value

tier_id Tier ID.

The value is an integer ranging from 0 to 31.

name Tier name.

The value contains 1 to 127 letters, digits, hyphens (-), underscores (_), and periods (.) and must start with a letter and end with a letter or a digit.

Level

Resource administrator

Usage Guidelines

None

Example

Modify a tier.

admin:/>change system tier 6 test2
Command executed successfully.

System Response

None

Translation
Download
Updated: 2019-05-07

Document ID: EDOC1100067955

Views: 24914

Downloads: 7

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next