No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

OceanStor 9000 V5 7.0 Command Reference 03

Rate and give feedback :
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
show snmp status

show snmp status

Function

The show snmp status command is used to query the status of the Simple Network Management Protocol (SNMP) agent service.

Format

show snmp status [ controller ]

Parameters

Parameter

Description

Value

controller ID of a controller running the SNMP agent service.

The value can contain only 1 to 127 letters, digits, hyphens (-), underscores (_), and periods (.), press Ctrl+A to view available list.

Level

Read-only user

Usage Guidelines

  • Run the show snmp status [controller] command to query the status of the SNMP agent service.about a specified controller running the SNMP agent service in a specified cluster.
  • Run the show snmp status command to query the status of the SNMP agent service about all controllers running the SNMP agent service in all clusters in the system.

Example

Query the status of the SNMP agent service.

admin:/>show snmp status
 
  Controller  Name  Status   Memory      CPU(%) 
  ----------  ----  -------  ----------  ------ 
  151         SNMP  Running     0.000KB  0 
  152         SNMP  Stopped     0.000KB  0 
  153         SNMP  Stopped     0.000KB  0

System Response

The following table describes the parameter meanings.

Parameter

Meaning

Controller

ID of a controller running the SNMP agent service.

Name

Service name.

Status

Service status

  • Stopped: The SNMP agent service is stopped.
  • Running: The SNMP agent service is running.

Memory

Memory space occupied (unit: KB).

CPU

CPU usage.

Translation
Download
Updated: 2019-05-07

Document ID: EDOC1100067955

Views: 24262

Downloads: 7

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next