No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

OceanStor 9000 V5 7.0 Command Reference 03

Rate and give feedback :
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
show nas_service cifs_service

show nas_service cifs_service

Function

The show nas_service cifs_service command is used to query the configurations of share protocol services in a cluster.

Format

show nas_service cifs_service

Parameters

None

Level

Read-only user

Usage Guidelines

None

Example

Query the configurations of share protocol services in a cluster.

admin:/>show nas_service cifs_service
 
SecurityModel    GuestEnable  SignRequired  SignEnable  EnableOpLock  OpLockTimeout  
---------------  -----------  ------------  ----------  ------------  -------------  
ALL_ATTESTATION  disable      disable       disable     enable        35             
NotifyEnable  UseTcpOnly  WindowsIP  AuthenticationDomain  JoinDomainAnonymously  
------------  ----------  ---------  --------------------  ---------------------  
enable        disable     --                               0                      
AbseEnable  SMB2EnabledForDCConnections  MaxSessionDisplay  MaxOpenFilesDisplay  
----------  ---------------------------  -----------------  -------------------  
disable     enable                       0                  0                                             
SMB3EnabledForDCConnections  SMB1PriorityEnabledForDCConnections  ReserveUnixSecurity 
---------------------------  -----------------------------------  ------------------- 
disable                      enable                               disable                  
NTAclEanbled 
------------
enable       

System Response

The following table describes the parameter meanings.

Parameter

Meaning

SecurityModel

Authentication mode

  • local authentication
  • ad domain authentication
  • local authentication+domain authentication
  • ldap domain authentication.

GuestEnable

Whether to allow guest access.

SignRequired

Whether enforcing signature is enabled.

SignEnable

Whether signature is enabled.

EnableOpLock

Optimization lock switch.

OpLockTimeout

Timeout period of the optimization lock.

NotifyEnable

Whether to enable the notify function.

UseTcpOnly

Whether to use TCP connections only.

WindowsIP

Whether to use the IP address of the current Window operating system.

AuthenticationDomain

Full domain name of the AD domain that the file server has joined in.

JoinDomainAnonymously

Whether the file server joins the domain in an anonymous way.

AbseEnbale

Access Based Share Enumeration(ABSE) switch.

SMB2EnabledForDCConnections

Whether connecting domain controller over SMB2 is enabled.

MaxSessionDisplay

The max number when querying sessions by MMC.

MaxOpenFilesDisplay

The max number when querying open files by MMC.

SMB3EnabledForDCConnections

Whether connecting domain controller over SMB3 is enabled.

SMB1PriorityEnabledForDCConnections

Whether connecting domain controller over SMB1 firstly is enabled.

ReserveUnixSecurity

Whether the reserve UNIX permission switch is enabled.

NTAclEanbled

Whether the NT ACL permission switch is enabled.

Translation
Download
Updated: 2019-05-07

Document ID: EDOC1100067955

Views: 24737

Downloads: 7

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next