No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

OceanStor 9000 V5 7.0 Command Reference 03

Rate and give feedback :
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
show node custom

show node custom

Function

The show node custom command is used to query the configuration of a node connected to a third party.

Format

show node custom [node_id]

Parameters

Parameter

Description

Value

node_id Object ID.

The value is a string of 1 to 127 characters, including letters, digits, hyphens (-), underscores (_), and periods (.).

Level

Super administrator

Usage Guidelines

None

Example

  • The command is used to query the configuration of all nodes in a batch.

    admin:/>show node custom
      ID             : 15879
      name           : Node62-7
      slotModel      : 25X1
      slotType       : ZYSX
      startTime      : 2018-09-05 14:22:32
      totalUsed      : 25
      totalKicked    : 0
      dataunitcount  :
      isExitPlatform : LogOff
      dataunitIp     :
    --------------------------------------
      ID             : 15880
      name           : Node62-8
      slotModel      : 25X1
      slotType       : ZYSX
      startTime      : 2018-09-05 14:22:42
      totalUsed      : 25
      totalKicked    : 0
      dataunitcount  :
      isExitPlatform : LogOff
      dataunitIp     :
    --------------------------------------
      ID             : 18433
      name           : Node72-1
      slotModel      : 25X1
      slotType       : ZYSX
      startTime      : 2018-09-05 14:23:07
      totalUsed      : 25
      totalKicked    : 0
      dataunitcount  :
      isExitPlatform : LogOff
      dataunitIp     :
     
  • The command is used to query the configuration of a single node.

    admin:/>show node custom 18433
      ID             : 18433
      name           : Node72-1
      slotModel      : 25X1
      slotType       : ZYSX
      startTime      : 2018-09-05 14:23:07
      totalUsed      : 25
      totalKicked    : 0
      dataunitcount  :
      isExitPlatform : LogOff
      dataunitIp     :

System Response

The following table describes the parameter meanings.

Parameter

Meaning

ID

Object ID.

name

Node alias.

slotModel

Slot scale.

slotType

Encoding mode of a slot.

startTime

Node start time.

totalUsed

Total number of used disks on a node.

totalKicked

The number of historical faulty disks on a node.

dataunitcount

Node registration number.

isExitPlatform

Identifier of deregistering a node.

dataunitIp

IP address of a node connected to a third-party platform.

Translation
Download
Updated: 2019-05-07

Document ID: EDOC1100067955

Views: 24795

Downloads: 7

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next