No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

OceanStor 9000 V5 7.0 Command Reference 03

Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
change remote_replication channel

change remote_replication channel

Function

The change remote_replication channel command is used to modify a channel in remote replication zone.

Format

change remote_replication channel <id> [name=?] [target_ip=?] [password_changed=?] [bandwidth_limit_switch=off]

change remote_replication channel <id> [name=?] [target_ip=?] [password_changed=?] [bandwidth_limit_switch=on] [bandwidth_limit_unit=?] [bandwidth_limit_size=?]

Parameters

Parameter

Description

Value

id Channel ID.

The value is an integer between "0" and "4294967294".

name Channel name.

The value is a combination of numbers, letters, hyphens (-), dot (.), and underscores (_) and is 1 to 31 characters in length.

target_ip Channel authentication IP.

The value is a combination of numbers anddot (.), and is 7 to 15 characters in length.

password_changed Whether to modify channel authentication password.

true:modify channel authentication password.

bandwidth_limit_switch Bandwidth limit switch.

on:turn on the bandwidth limit switch.

off:turn off the bandwidth limit switch.

bandwidth_limit_unit Bandwidth unit.

The bandwidth_limit_unit must be set when bandwidth_limit_switch is set on.

mbps:The unit is Mbit/s.

kbps:The unit is Kbit/s.

gbps:The unit is Gbit/s.

bandwidth_limit_size Bandwidth size.

The bandwidth_limit_size must be set when bandwidth_limit_switch is set on.

The value is an integer between "2" and "99999999" when bandwidth_limit_unit is mbps;

The value is an integer between "2048" and "99999999" when bandwidth_limit_unit is kbps;

The value is an integer between "1 and "99999999" when bandwidth_limit_unit is gbps.

Level

Resource administrator

Usage Guidelines

None

Example

  • Modify a channel in remote replication zone.

    admin:/>change remote_replication channel 0 name=aa target_ip=192.168.209.233 password_changed=true bandwidth_limit_switch=on mbps 5
    WARNING: You are about to change the link bandwidth limit of the replication channel.
    This operation enables the link bandwidth limit for the local device to send data in the replication channel.
    Before performing this operation, ensure that you have selected the correct replication channel and the link bandwidth limit needs to be changed.
    WARNING:You are about to change the link authentication user password of the replication channel.
    This operation changes the user password, causing link authentication failure.
    Before performing this operation, ensure that you have selected the correct replication channel and the link authentication user password needs to be changed.
    Have you read warning message carefully?(y/n)y
     
    Are you sure you want to perform the operation?(y/n)y
    Please input your password:********
    Command executed successfully.
  • Modify a channel in remote replication zone.

    admin:/>change remote_replication channel 0 name=aa target_ip=192.168.209.233 password_changed=true bandwidth_limit_switch=off
    WARNING: You are about to change the link authentication user password of the replication channel.
    This operation changes the user password, causing link authentication failure.
    Before performing this operation, ensure that you have selected the correct replication channel and the link authentication user password needs to be changed.
    Have you read warning message carefully?(y/n)y
     
    Are you sure you want to perform the operation?(y/n)y
    Please input your password:********
    Command executed successfully.

System Response

None

Translation
Download
Updated: 2019-05-07

Document ID: EDOC1100067955

Views: 25067

Downloads: 7

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next