No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


OceanStor 9000 V5 7.0 Command Reference 03

Rate and give feedback :
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
change system ipmi_password

change system ipmi_password


Run the "change system ipmi_password <user_name>" command to change the password of a specified IPMI user on a node.


change system ipmi_password < user_name >





user_name IPMI user name.

User name can be root or admin.

super_admin password Super administrator's password.

Super administrator's password.

password New password of IPMI user.

The value contains 8 to 20 letters and must contain special characters and any two character types of digits, uppercase, and lowercase characters. The value must be different from the user name or mirror writing of the user name. You can enter special characters and special characters do not need to be escaped.

Special characters include: `~!@#$%^&*()-_=+|[{}];:'\",<.>/?. and spaces.The password cannot begin with a hyphen (-).


Super administrator

Usage Guidelines

Run the "change system ipmi_password <user_name>" command to change the password of a specified IPMI user on a node.

In a cluster that contains P36E/C36E/P25E/P12E nodes, run the "change system ipmi_password admin" command to change the password of IPMI user admin after the deployment and each capacity expansion to facilitate subsequent system startup and node power-on.


Change the password of IPMI user admin on a node.

admin:/>change system ipmi_password admin
Please input the super_admin password:**************
Please enter your new password:*************
Please enter your new password again:*************
WARNING: You are about to change the user account ipmi passwords of the operating system's online nodes. The new passwords will take effect upon the next login. 
Have you read warning message carefully?(y/n)y
Are you sure you want to perform the operation?(y/n)y
Command executed successfully.

System Response


Updated: 2019-05-07

Document ID: EDOC1100067955

Views: 24265

Downloads: 7

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Previous Next