No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

OceanStor 9000 V5 7.0 Command Reference 04

Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
delete dataunit

delete dataunit

Function

The delete dataunit command is used to logout a storage node.

Format

delete dataunit <node_id>

Parameters

Parameter

Description

Value

node_id The ID of storage node.

LogOff(0): log off.

LogOn(1): log on.

Level

Super administrator

Usage Guidelines

None

Example

The command is used to logout a storage node.

admin:/>delete dataunit 18433
WARNING: Are you sure you want to perform the operation?(y/n)
Have you read warning message carefully?(y/n)y
Are you sure you want to perform the operation?(y/n)y
Command executed successfully.

System Response

None

Download
Updated: 2019-07-25

Document ID: EDOC1100067955

Views: 27656

Downloads: 7

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next