No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


OceanStor 9000 V5 7.0 Command Reference 03

Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
change system ipmi

change system ipmi


The change system ipmi command is used to modify the gateway and mask of BMC.


change system ipmi [Cluster_IpmiIpv4GateWay=?] [Cluster_IpmiIpv4Mask=?] [Cluster_IpmiIpv6GateWay=?] [Cluster_IpmiIpv6Prefix=?]





Cluster_IpmiIpv4GateWay IPv4 gateway of BMC.

The value is a character string in the format of an IPv4 address.

Cluster_IpmiIpv4Mask IPv4 mask of BMC.

The value is a character string in the format of a mask.

Cluster_IpmiIpv6GateWay IPv6 gateway of BMC.

The value is a character string in the format of an IPv6 address.

Cluster_IpmiIpv6Prefix IPv6 prefix of BMC.

The value is an integer ranging from 1 to 128.


Device administrator

Usage Guidelines

You must specify at least one parameter among the four optional parameters.


Modify the gateway and mask of BMC.

admin:/>change system ipmi Cluster_IpmiIpv4Mask= Cluster_IpmiIpv4GateWay= Cluster_IpmiIpv6Prefix=65 Cluster_IpmiIpv6GateWay=192:168::1
WARNING: You are about to modify the IPMI gateway and subnet mask. Ensure that the IPMI addresses of all nodes are changed to be in the same network segment as the new gateway. Otherwise, the IPMI addresses may be unreachable.
Have you read warning message carefully?(y/n) y
Are you sure you want to perform the operation?(y/n)y
Command executed successfully.

System Response


Updated: 2019-05-07

Document ID: EDOC1100067955

Views: 25136

Downloads: 7

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Previous Next