No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

OceanStor 9000 V5 7.0 Command Reference 03

Rate and give feedback :
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
show system nodepool

show system nodepool

Function

The show system nodepool command is used to query information about node pools.

Format

show system nodepool [ id ]

Parameters

Parameter

Description

Value

id Node pool ID.

The value is an integer ranging from 1 to 32.

Level

Resource administrator

Usage Guidelines

  • Run the show system nodepool [id] command to query information about a specified node pool.
  • Run the show system nodepool command to query information about all node pools in the system.
  • Read-only users can also run this command to view information.

Example

Query information about node pools.

admin:/>show system nodepool   
 
  ID                        : 1    
  Name                      : TestCluster  
  Parent Type               : SNAS_SYS_TIER   
  Tier ID                   : 0              
  Enable Spillover          : disable        
  Migrate Node Pool    : 0              
  HDD Total Capacity        : 2.029TB        
  HDD Used Capacity         : 11.934GB       
  SSD Total Capacity        : 0.000MB        
  SSD Used Capacity         : 0.000MB        
  Capacity Threshold(%)     : 85             
  Readonly Threshold(%)     : 90             
  Recover Value(%)          : 80             
  Recover Readonly Value(%) : 85

System Response

The following table describes the parameter meanings.

Parameter

Meaning

ID

Node pool ID.

Name

Node pool name.

Parent Type

Operation object.

Tier ID

Tier ID.

Enable Spillover

Whether node pool migration is enabled.

Migrate Node Pool

Node pool ID.

HDD Total Capacity

Total capacity of HDDs.

HDD Used Capacity

Used capacity of HHDs.

SSD Total Capacity

Total capacity of SSDs.

SSD Used Capacity

Used capacity of SSDs.

Capacity Threshold

High watermark alarm threshold, expressed in percentage.

Readonly Threshold

Read-only watermark alarm threshold, expressed in percentage.

Recover Value

High watermark recovery threshold, expressed in percentage.

Recover Readonly Value

Read-only watermark recovery threshold, expressed in percentage.

Translation
Download
Updated: 2019-05-07

Document ID: EDOC1100067955

Views: 24789

Downloads: 7

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next