No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

OceanStor 9000 V5 7.0 Command Reference 03

Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
delete system user

delete system user

Function

The delete system user command is used to delete system users.

Format

delete system user < id >

Parameters

Parameter

Description

Value

id User ID.

The value is range from 1 to 4294967294.

You can press Ctrl+A to view the available values of id.

Level

Super administrator

Usage Guidelines

This command is used by the super administrator to delete a common administrator, resource administrator, device administrator, or read-only user.

Example

Delete a system user.

admin:/>delete system user 3
DANGER: You are about to remove the selected user. After this operation, the user can no longer log in. Before performing this operation, check whether the user can be removed.
Have you read danger alert message carefully?(y/n)y
 
Are you sure you want to perform the operation?(y/n)y
Command executed successfully.

System Response

None

Translation
Download
Updated: 2019-05-07

Document ID: EDOC1100067955

Views: 24873

Downloads: 7

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next