No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

OceanStor 9000 V5 7.0 Command Reference 04

Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
change system smallfile

change system smallfile

Function

The change system smallfile command is used to enable or disable small-file aggregation.

Format

change system smallfile < smallfile >

Parameters

Parameter

Description

Value

smallfile Status of small-file aggregation

close: Small-file aggregation is disabled.

open: Small-file aggregation is enabled.

Level

Resource administrator

Usage Guidelines

None

Example

To enable or disable small-file aggregation, run the following command:

admin:/>change system smallfile open 
Command executed successfully. 
 

System Response

None

Download
Updated: 2019-07-25

Document ID: EDOC1100067955

Views: 27621

Downloads: 7

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next