No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

OceanStor 9000 V5 7.0 Command Reference 03

Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
change copychunk

change copychunk

Function

The change copychunk command is used to modify the status of copychunk of a protocol cluster.

Format

change copychunk <status>

Parameters

Parameter

Description

Value

status CopyChunk switch.
  • open:turn on the switch of copychunk;
  • close:turn off the switch of copychunk;
  • default:close.

Level

Device administrator

Usage Guidelines

None.

Example

Modify the status of copychunk of a protocol cluster.

admin:/>change copychunk open
Command executed successfully.

System Response

None

Translation
Download
Updated: 2019-05-07

Document ID: EDOC1100067955

Views: 25317

Downloads: 7

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next