No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

OceanStor 9000 V5 7.0 Command Reference 03

Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
show snmp v1v2c_status

show snmp v1v2c_status

Function

The show snmp v1v2c_status command is used to query the status of the snmp v1&v2c protocol service.

Format

show snmp v1v2c_status

Parameters

None

Level

Read-only user

Usage Guidelines

None

Example

Query the status of the snmp v1&v2c protocol service.

admin:/>show snmp v1v2c_status
 
  V1V2C Status  
  ------------  
  disable

System Response

The following table describes the parameter meanings.

Parameter

Meaning

V1V2C Status

The status of snmp v1&v2c protocol service.

  • enable: The status of the snmp v1&v2c protocol service is running.
  • disable: The status of the snmp v1&v2c protocol service is stop.
Translation
Download
Updated: 2019-05-07

Document ID: EDOC1100067955

Views: 25091

Downloads: 7

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next