No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


OceanStor 9000 V5 7.0 Command Reference 03

Rate and give feedback :
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
create infoequalizer zone

create infoequalizer zone


The create infoequalizer zone command is used to create a protocol cluster zone.


create infoequalizer zone < name > < domain > < balance_strategy > < subNetName > [ description ]





name Name of a protocol cluster zone.

The value contains 3 to 80 letters, digits, hyphens (-), underscores (_), and periods (.), and must start with a letter and end with a letter or a digit.

domain Domain name.

The value is a character string consisting of letters, numbers, periods (.), and hyphens (-). Each level of the domain name consists of a maximum of 63 characters, and levels are delimited by dots (.). The domain name (including dots) and that of the domain name it belongs to combined must not exceed 253 characters in length. Each level cannot start or end with a hyphen (-).

balance_strategy Balancing policy for protocol cluster zones.

polling: polling

node_connected_number: number of connected nodes

cpu_usage: CPU usage

node_throughput: node throughput

node_load: node comprehensive load.

subnetname Subnet name.

The value contains 1 to 127 letters, digits, hyphens (-), underscores (_), and periods (.). Press Ctrl+A to view available list.

description Description.

The value contains 1 to 255 characters.


Device administrator

Usage Guidelines



Create a protocol cluster zone.

admin:/>create infoequalizer zone testzone polling default
Command executed successfully.

System Response


Updated: 2019-05-07

Document ID: EDOC1100067955

Views: 24316

Downloads: 7

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Previous Next