No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

OceanStor 9000 V5 7.0 Command Reference 03

Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
delete notification trap

delete notification trap

Function

The delete notification trap command is used to delete the trap IP addresses for notifying alarms.

Format

delete notification trap < server_id >

Parameters

Parameter

Description

Value

server_id Trap IP address ID.

The value can contain only 1 to 127 letters, digits, hyphens (-), underscores (_), and periods (.).

You can press Ctrl+A to view the available values of id.

Level

Administrator

Usage Guidelines

After this command is executed, you can run the show notification trap command to view the result.

Example

Delete the trap IP addresses for notifying alarms.

admin:/>delete notification trap 3
Command executed successfully.

System Response

None

Translation
Download
Updated: 2019-05-07

Document ID: EDOC1100067955

Views: 25363

Downloads: 7

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next