No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


OceanStor 9000 V5 7.0 Command Reference 03

Rate and give feedback :
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
create route config

create route config


The create route config command is used to add the configuration information of the user-defined router.


create route config <dest_ip> <network_type> [prefer]





dest_ip IP address of the router that is to be added.

The value is a string in the standard IP address format.

network_type Network type of the router that is to be added.

The value is a string. "Front_end" and "Management" respectively indicates the front-end and management network.

prefer Priority of the router that is to be added.

The value is an unsigned integer from 1 to 9999. If the priority is not written, the default value is 1000.


Device administrator

Usage Guidelines

  • Ensure that the IP address of the user-defined router that is to be added has never been configured for any router.
  • If the priority of the optional parameter is not written, the default value is 1000.


Add the user-defined router information.

admin:/>create route config Management 1777 
Command executed successfully.

System Response


Updated: 2019-05-07

Document ID: EDOC1100067955

Views: 24250

Downloads: 7

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Previous Next