No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

OceanStor 9000 V5 7.0 Command Reference 03

Rate and give feedback :
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
change system boot_upon_poweron

change system boot_upon_poweron

Function

The change system boot_upon_poweron on/off function is used to enable or disable the startup upon power-on function of cluster nodes.

Format

change system boot_upon_poweron <switch>

Parameters

Parameter

Description

Value

switch Switch of the startup upon power-on function.

"on": The system automatically starts after power-on.

"off": The system does not start after power-on.

Level

Device administrator

Usage Guidelines

None

Example

Enable or disable the startup upon power-on function of cluster nodes.

admin:/>change system boot_upon_poweron off
CAUTION: You are about to enable or disable the startup upon power-on function of cluster nodes. After the command is executed, you need to restart all the nodes in the cluster.
Do you wish to continue?(y/n)y
Command executed successfully.

System Response

None

Translation
Download
Updated: 2019-05-07

Document ID: EDOC1100067955

Views: 24150

Downloads: 7

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next