No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

OceanStor 9000 V5 7.0 Command Reference 03

Rate and give feedback :
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
change protocol loginfo

change protocol loginfo

Function

The change protocol loginfo command is used to modify information about operation logs of files and folders.

Format

change protocol loginfo < operationTypeEnable > < createType > < deleteType > < readType > < writeType > < renameType > < logPath > < logSpace >

Parameters

Parameter

Description

Value

operationTypeEnable Whether to enable the file and folder operation log function.

true: The file and folder operation log function is enabled.

createType Whether to enable logs of the create type.

true: Logs of the create type are enabled.

false: Logs of the create type are disabled.

deleteType Whether to enable logs of the delete type.

true: Logs of the delete type are enabled.

false: Logs of the delete type are disabled.

readType Whether to enable logs of the read type.

true: Logs of the read type are enabled.

false: Logs of the read type are disabled.

writeType Whether to enable logs of the write type.

true: Logs of the write type are enabled.

false: Logs of the write type are disabled.

renameType Whether to enable logs of the rename type.

true: Logs of the rename type are enabled.

false: Logs of the rename type are disabled.

logPath Path for saving operation logs.

The value contains 1 to 4000 characters.

logSpace Log space capacity.

The value is an integer ranging from 250 to 3072. It is expressed in GB.

Level

Device administrator

Usage Guidelines

None

Example

Modify information about operation logs of files and folders.

admin:/>change protocol loginfo true true true true true true /test 250
Command executed successfully.

System Response

None

Translation
Download
Updated: 2019-05-07

Document ID: EDOC1100067955

Views: 24723

Downloads: 7

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next