No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

OceanStor 9000 V5 7.0 Command Reference 03

Rate and give feedback :
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
show virtual_machine batch_operation_status

show virtual_machine batch_operation_status

Function

The show virtual_machine batch_operation_status command is used to query the output of VM batch operation commands.

Format

show virtual_machine batch_operation_status

Parameters

None

Level

Read-only user

Usage Guidelines

None

Example

Queries the output of VM batch operation commands.

admin:/>show virtual_machine batch_operation_status
  batchCommandType  batchCommandStatus  NodeId  NodeStatus  VmId       VmName             VMStatus  ErrorCode
  ----------------  ------------------  ------  ----------  ---------  -----------------  --------  ---------
  Create            Finish              10095   Finish      661585921  vm_test_661585921  Success   --
  Create            Finish              10097   Finish      661716993  vm_test_661716993  Success   --
  Create            Finish              10099   Finish      661848065  vm_test_661848065  Success   --
 

System Response

The following table describes the parameter meanings.

Parameter

Meaning

batchCommandType

Batch operation command types

Create: creates a VM.

Delete: deletes a VM.

PowerOn: powers on a VM.

Change: changes a VM.

PowerOff: powers off a VM.

Force Poweroff: powers off a VM forcibly.

Reboot: restarts a VM.

Force Reboot: reboots a VM forcibly.

Add Port: adds a network port to a VM.

Remove Port: removes a network port from a VM.

Upgrade Vmtools: upgrades VMTools.

batchCommandStatus

Status of batch operation commands.

NodeId

ID of the node where commands are executed in a batch.

NodeStatus

Status of batch operation commands on a node.

VmId

ID of the VM where commands are executed in a batch.

VmName

Name of the VM where commands are executed in a batch.

VmStatus

Status of batch operation commands on a VM.

ErrorCode

Error code corresponding to a batch operation command failure When the commands are executed successfully or out of time limit, an error code will not generate.

Translation
Download
Updated: 2019-05-07

Document ID: EDOC1100067955

Views: 24232

Downloads: 7

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next