No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


OceanStor 9000 V5 7.0 Command Reference 03

Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
change object_storage_compatible_s3_responseNamespace

change object_storage_compatible_s3_responseNamespace


The change object_storage_compatible_s3_responseNamespace command is used to modify the namespace of S3 response message XML file.


change object_storage_compatible_s3_responseNamespace <namespace>





namespace namespace.

Namespace rules

1. The namespace can contain a maximum of 255 characters and cannot contain Chinese characters.

2. The namespace must start with http or https.

3. The domain name consists of at least two levels. Each level contains a maximum of 63 characters, starts with an uppercase/lowercase letter or digit, and supports special characters including hyphens (-) and dots (.).

4. IPv4 and IPv6 are supported.

5. The port ID ranges from 1 to 65535.

6. The path can contain uppercase/lowercase letters, digits, and special characters including ., +, =, -, @, /, and ?.


Device administrator

Usage Guidelines

This command is used to modify the namespace of S3 response message XML file, this operation will causing Object Storage Service Controller service restart, please operate or start when the business is not busy.


Modify the namespace of S3 response message XML file.

admin:/>change object_storage_compatible_s3_responseNamespace
WARNING: You are about to set namespace. This operation will causing Object Storage Service Controller service restart and Object Storage Service Controller service to be temporarily unavailable.
Have you read warning message carefully?(y/n)y
Are you sure you want to perform the operation?(y/n)y
Command executed successfully.

System Response


Updated: 2019-05-07

Document ID: EDOC1100067955

Views: 25077

Downloads: 7

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Previous Next