No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

OceanStor 9000 V5 7.0 Command Reference 03

Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
show system subnetswitch

show system subnetswitch

Function

The show system subnetswitch command is used to check whether the system allows the service network and management network to reside in the same network segment.

Format

show system subnetswitch

Parameters

None

Level

Read-only user

Usage Guidelines

None

Example

Check whether the system allows the service network and management network to reside in the same network segment.

admin:/>show system subnetswitch
 
  Switch : On

System Response

The following table describes the parameter meanings.

Parameter

Meaning

Switch

Indicates whether the system allows the service network and management network to reside in the same network segment.

Translation
Download
Updated: 2019-05-07

Document ID: EDOC1100067955

Views: 24982

Downloads: 7

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next