No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

OceanStor 9000 V5 7.0 Command Reference 03

Rate and give feedback :
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
show route config

show route config

Function

The show route config command is used to display the configuration information of the user-defined router.

Format

show route config

Parameters

None

Level

Device administrator

Usage Guidelines

The query result only includes the information of the router that is configured in the user-defined way.

Example

Query the configuration information of the user-defined router.

admin:/>show route config
 
  dest_ip           network_type  prefer  
  ----------------  ------------  ------  
  192.168.100.10/16 Front_end     1777    
  192.168.100.11/16 Front_end     1777    
  192.168.100.12/16 Front_end     1777    
  192.168.100.13/16 Front_end     1777    
  fc00::1234/64     Management    600     
  fc00::1235/64     Management    600

System Response

The following table describes the parameter meanings.

Parameter

Meaning

dest_ip

IP address of the router.

network_type

Network type.

prefer

Priority of the router.

Translation
Download
Updated: 2019-05-07

Document ID: EDOC1100067955

Views: 24627

Downloads: 7

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next