No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

OceanStor 9000 V5 7.0 Command Reference 03

Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
show service connection

show service connection

Function

The show service connection command is used to test the connectivity of services.

Format

show service connection < service_type > < target_type > < target_address > [ netType ]

Parameters

Parameter

Description

Value

service_type Service type.

NTP: NTP service.

DNS: DNS service.

AD: AD domain service.

LDAP: LDAP service.

NIS: NIS service.

target_type Type of the target address.

ip: IP address.

domain: domain address.

target_address Target address.

The target address can be an IP address or a domain address.

The IP address cannot be cyclic nor end with a zero.

netType Network type.
  • Front-end network.
  • Management network.

Level

Device administrator

Usage Guidelines

None

Example

Test the connectivity of services.

admin:/>show service connection DNS ip 192.168.100.10 2
Command executed successfully.

System Response

None

Translation
Download
Updated: 2019-05-07

Document ID: EDOC1100067955

Views: 25332

Downloads: 7

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next