No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


OceanStor 9000 V5 7.0 Command Reference 03

Rate and give feedback :
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
change object_storage_compatible_s3_bssdomain

change object_storage_compatible_s3_bssdomain


The change object_storage_compatible_s3_bssdomain command is used to configure the bitmap for controlling bill record format.


change object_storage_compatible_s3_bssdomain <bitmap>





bitmap For details about the CDR format, see the CDR Format.

The parameter has 24 bits and the valid value of each bit can be '0', '1', '2', or '9'.If the delivered parameters contain '9', keep the existing value and do not modify the value of corresponding bit.


Device administrator

Usage Guidelines

For details about the CDR bitmap format, see the corresponding CDR interface description.


Configure the bitmap for controlling bill record format.

change object_storage_compatible_s3_bssdomain 000000000000000000000001
WARNING: You are about to set bssdomain(BitMap). Please see the <FusionStorage Object CLI Command Reference> for details.
Have you read warning message carefully?(y/n)y
Are you sure you want to perform the operation?(y/n)y
Command executed successfully.

System Response


Updated: 2019-05-07

Document ID: EDOC1100067955

Views: 24179

Downloads: 7

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Previous Next