No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


OceanStor 9000 V5 7.0 Command Reference 03

Rate and give feedback :
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
change ndmp_service username_password

change ndmp_service username_password


The change ndmp_service username_password command is used to set the username and pasword of the NDMP service.


change ndmp_service username_password < user_name >





user_name NDMP username.

The value is a character string that is 1 to 31 characters in length and include letters, numbers, underscores (_), hyphens (-), and periods (.). It cannot end with hyphens (-), underscores (_), or periods (.). The username will be used as the final username.

password NDMP password

The value contains 8 to 31 characters.The value must contain special characters and at least two of the following types: lowercase characters, uppercase characters, and digits, and be different from the user name or mirror writing of the user name.The password can contain special characters and special characters does not need to be escaped.Special characters include: `~!@#$%^&*()-_=+|[{}];:'\",<.>/?. and space.


Resource administrator

Usage Guidelines

Enter the username first. Run the "show ndmp_service" command to query existing usernames, or you can enter a new username. You will be prompted to enter the old password and enter the new password twice. Errors will display if you enter an incorrect old password or two inconsistent new passwords.


Set the password of the NDMP service.

admin:/>change ndmp_service username_password ndmp
Please enter your old password:**********
Please enter your new password:**********
Please enter your new password again:**********
WARNING: After the username or password is changed, ongoing services may be interrupted and backup servers must re-authenticate this user.
Have you read warning message carefully?(y/n)y
Are you sure you want to perform the operation?(y/n)y

System Response


Updated: 2019-05-07

Document ID: EDOC1100067955

Views: 24325

Downloads: 7

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Previous Next