No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

OceanStor 9000 V5 7.0 Command Reference 03

Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
change worm_softclock

change worm_softclock

Function

The change worm_softclock command is used to set a WORM soft clock.

Format

change worm_softclock < clocktime >

Parameters

Parameter

Description

Value

clocktime Time of the soft clock.

The value is a character string in the format of yyyy-mm-dd/HH:MM:SS. For example, 2014-06-12/13:00:00.

Level

Administrator

Usage Guidelines

This command is used to set a WORM soft clock. The soft clock can be set once only, namely, the setting is not modifiable.

Note:

Before the soft clock is set, other WORM commands cannot be executed.

Example

Set a WORM soft clock.

admin:/>change worm_softclock 2014-06-12/13:00:00
CAUTION: You are about to set the WORM clock. The WORM clock can be set once only. After it is set successfully, the settings cannot be changed. Suggestion: Ensure that your settings are correct.
Do you wish to continue?(y/n)y
Commond execute successfully.

System Response

None

Translation
Download
Updated: 2019-05-07

Document ID: EDOC1100067955

Views: 25320

Downloads: 7

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next