No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

OceanStor 9000 V5 7.0 Command Reference 03

Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
show system boot_upon_poweron

show system boot_upon_poweron

Function

The show system boot_upon_poweron command is used to query the status of the startup upon power-on function of cluster nodes.

Format

show system boot_upon_poweron

Parameters

None

Level

Device administrator

Usage Guidelines

Read-only users can also run this command to view information.

Example

Query the switch of the startup upon power-on function of cluster nodes.

admin:/>show system boot_upon_poweron
 
  ID     Name        Switch Status  
  -----  ----------  -------------  
  34562  F13-Node02  off            
  34564  F13-Node04  off            
  34565  F13-Node05  off

System Response

The following table describes the parameter meanings.

Parameter

Meaning

ID

Node ID.

Name

Node name.

Switch Status

Switch of the startup upon power-on function.

Translation
Download
Updated: 2019-05-07

Document ID: EDOC1100067955

Views: 25315

Downloads: 7

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next