No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

OceanStor 9000 V5 7.0 Command Reference 03

Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
delete domain ldap

delete domain ldap

Function

The delete domain ldap command is used to delete the information about the LDAP domain in the system.

Format

delete domain ldap

Parameters

None

Level

Device administrator

Usage Guidelines

Run the delete domain ldap command to delete all the information about the LDAP domain in the system.

Example

Delete the information about the LDAP domain in the system.

admin:/>delete domain ldap
WARNING: You are about to restore the LDAP domain to the initial configuration. After the LDAP domain is restored to the initial configuration, users and network groups in the LDAP domain cannot access the system and services connected to the LDAP domain are interrupted.
Have you read warning message carefully?(y/n)y
 
Are you sure you want to perform the operation?(y/n)y
Command executed successfully.

System Response

None

Translation
Download
Updated: 2019-05-07

Document ID: EDOC1100067955

Views: 25239

Downloads: 7

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next