No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


OceanStor 9000 V5 7.0 Command Reference 03

Rate and give feedback :
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
add infoequalizer node

add infoequalizer node


The add infoequalizer node command is used to add one node to the zone.


add infoequalizer node <zone_id> <node_id>





zone_id Zone ID of a node in a protocol clust.

The value contains 3 to 80 letters, digits, hyphens (-), underscores (_), and periods (.), and must start with a letter and end with a letter or a digit.

You can press Ctrl+A to view the available values of zone_id.

node_id ID of a node.

The value can only contain 1 to 127 digits.

You can press Ctrl+A to view the available values of node_id.


Device administrator

Usage Guidelines

1. One node can be added to 20 zones in different VLAN at most.

2. The node cannot be added to zones in the same VLAN.

3. The node cannot be added to a VLAN zone and a non-VLAN zone concurrently.

4. The node cannot be added to multiple non-VLAN zones concurrently.

5. The node is in a VLAN and cannot be added to the root zone.


Add one node to the zone.

admin:/>add infoequalizer node zone5 5641
Command executed successfully.

System Response


Updated: 2019-05-07

Document ID: EDOC1100067955

Views: 24151

Downloads: 7

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Previous Next