No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

OceanStor 9000 V5 7.0 Command Reference 03

Rate and give feedback :
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
show snapshot count

show snapshot count

Function

The show snapshot count command is used to check the number of snapshots.

Format

show snapshot count [ dir_path ]

Parameters

Parameter

Description

Value

dir_path Snapshot path.

The value is 2 to 4000 characters length and must start with a slash (/),the root directory is not supported. If this parameter is not specified, snapshots on all paths will be checked.

Level

Resource administrator

Usage Guidelines

Read-only users can also run this command to view information.

Example

Check the number of the snapshots of a specific directory.

admin:/>show snapshot count /SharePath1
 
  Count : 1

System Response

The following table describes the parameter meanings.

Parameter

Meaning

Count

Number of snapshots.

Translation
Download
Updated: 2019-05-07

Document ID: EDOC1100067955

Views: 24174

Downloads: 7

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next