No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

OceanStor 9000 V5 7.0 Command Reference 03

Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
create remote_replication channel

create remote_replication channel

Function

The create remote_replication channel command is used to create a channel in remote replication zone.

Format

create remote_replication channel <name> <target_ip> <local_zone_name> <remote_zone_name> [bandwidth_limit_switch=off]

create remote_replication channel <name> <target_ip> <local_zone_name> <remote_zone_name> [bandwidth_limit_switch=on] [bandwidth_limit_unit=?] [bandwidth_limit_size=?]

Parameters

Parameter

Description

Value

name Channel name

The value is a combination of numbers, letters, hyphens (-), dot (.), and underscores (_) and is 1 to 31 characters in length.

target_ip Channel authentication IP

The value is a combination of numbers anddot (.), and is 7 to 15 characters in length.

local_zone_name Local replication zone

The value is a combination of numbers, letters, hyphens (-), dot (.), and underscores (_) and is 1 to 31 characters in length.

remote_zone_name Remote replication zone

The value is a combination of numbers, letters, hyphens (-), dot (.), and underscores (_) and is 1 to 31 characters in length.

bandwidth_limit_switch Bandwidth limit switch

on:turn on the bandwidth limit switch.

off:turn off the bandwidth limit switch.

bandwidth_limit_unit Bandwidth unit

The bandwidth_limit_unit must be set when bandwidth_limit_switch is set on.

mbps:The unit is Mbit/s.

kbps:The unit is Kbit/s.

gbps:The unit is Gbit/s.

bandwidth_limit_size Bandwidth size

The bandwidth_limit_size must be set when bandwidth_limit_switch is set on.

The value is an integer between "2" and "99999999" when bandwidth_limit_unit is mbps;

The value is an integer between "2048" and "99999999" when bandwidth_limit_unit is kbps;

The value is an integer between "1 and "99999999" when bandwidth_limit_unit is gbps;

Level

Resource administrator

Usage Guidelines

None

Example

  • Create a channel in remote replication zone.

    admin:/>create remote_replication channel channel_79 192.168.91.29 rnmDefaultZoneName rnmDefaultZoneName bandwidth_limit_switch=off
    Command executed successfully.
  • Create a channel in remote replication zone.

    admin:/>create remote_replication channel channel_79 192.168.91.29 rnmDefaultZoneName rnmDefaultZoneName bandwidth_limit_switch=on mbps 3
    Command executed successfully.

System Response

None

Translation
Download
Updated: 2019-05-07

Document ID: EDOC1100067955

Views: 25375

Downloads: 7

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next