No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


OceanStor 9000 V5 7.0 Command Reference 04

Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
change infoequalizer domain

change infoequalizer domain


The change infoequalizer domain command is used to modify the dynamic domain name of a protocol cluster.


change infoequalizer domain < domain >





domain Domain name.

The value is a character string consisting of letters, digits, periods (.), and hyphens (-). Each level of the domain name contains a maximum of 63 characters and levels are separated by periods (.). The domain name (including periods) contains a maximum of 251 characters. If there are non-root sub-clusters under this domain name, the character string must be in the format of "sub-cluster domain name.domain names at different levels.". Under such circumstances, the maximum length of the character string is 251 minus the strength of sub-cluster domain name. Each level cannot start or end with a hyphen (-).


Device administrator

Usage Guidelines



Modify the dynamic domain name of a protocol cluster.

admin:/>change infoequalizer domain
WARNING: You are about to change the Infoequalizer domain name. After the domain name is changed,
clients must use the new domain name to access the domain.
Clients that have been connected to the domain before the change are not affected.
Have you read warning message carefully?(y/n)y
Are you sure you want to perform the operation?(y/n)y
Command executed successfully.

System Response


Updated: 2019-07-25

Document ID: EDOC1100067955

Views: 27533

Downloads: 7

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Previous Next