No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

OceanStor 9000 V5 7.0 Command Reference 03

Rate and give feedback :
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
change camera protocol

change camera protocol

Function

The change camera protocol command is used to change the protocol of a camera and change the parameters associated with this protocol.

Format

change camera protocol <camera_id> <camera_protocol> <cmaera_ip> <cmaera_port> <user_name>

change camera protocol <camera_id> <camera_protocol> <auth_flag>

change camera protocol <camera_id> <camera_protocol> <auth_flag> <passwd_rule> <user_name>

Parameters

Parameter

Description

Value

camera_id Camera ID.

The value is a string of 1 to 20 characters excluding the slash (/) and cannot be a period (.) or two periods (..). \s indicates a space, \| indicates |, \q indicates ?, and \\ indicates \.

camera_protocol Camera protocol.

standard: Standard Protocol

hikvision: Hikvision SDK

dahua: Dahua SDK.

camera_ip Camera IP address.

Valid IPv4 format.

camera_port Camera port.

1~65535.

auth_flag Authentication flag.

Needless: Authentication is not required.

BasicAuth: The Basic authentication mode is required.

DigestAuth: The Digest authentication mode is required.

Hmac: The Hmac authentication mode is required.

passwd_rule Password rule.

inner: Internal rules must be complied with (the length complies with the value set in the security policy, that is, 8 to 64 characters). The password must contain at least two types of the following characters: Uppercase letters, lowercase letters, and digits. The value cannot be the same as or reverse of the user name. A maximum of three consecutive repeated characters are allowed. outer: External rules must be complied with (1 to 64 characters).

user_name Camera user name.

The value is a string of 1 to 64 characters. \s indicates a space, \| indicates |, \q indicates ?, and \\ indicates \.

admin_password Super admin password.

The super administrator password is used to check whether the password of the super administrator is the same as the password of the super administrator in the cluster.

password Camera password.

1.The password of a camera that uses the standard protocol follow the password rule.

2.The password of a camera that uses the SDK protocol is a string of 1 to 64 characters.

Level

Super administrator

Usage Guidelines

You can run the change camera protocol command to change the protocol of a camera and change the parameters associated with this protocol.

Example

  • Change the protocol type of a camera from standard to SDK.

    admin:/>change camera protocol camera001 hikvision 192.168.10.10 8088 username
    Please input the super_admin password:**********
    Please enter your new password:******
    Please enter your new password again:******
    CAUTION: You are about to modify the protocol parameter. If the parameter settings are incorrect, image data may fail to be received.
    Suggestion: Ensure the the protocol parameter  is the same as that of the camera.
    Do you wish to continue?(y/n)y
    Command executed successfully.
     
  • Change the protocol type of a camera from SDK to standard, and setting the authentication mode to Needless.

    admin:/>change camera protocol camera001 standard Needless
    Please input the super_admin password:**********
    CAUTION: You are about to modify the protocol parameter. If the parameter settings are incorrect, image data may fail to be received.
    Suggestion: Ensure the the protocol parameter  is the same as that of the camera.
    Do you wish to continue?(y/n)y
    Command executed successfully.
     
  • Change the protocol type of a camera from SDK to standard, and setting the authentication mode to Basic.

    admin:/>change camera protocol camera001 standard BasicAuth outer username
    Please input the super_admin password:**********
    Please enter your new password:******
    Please enter your new password again:******
    CAUTION: You are about to modify the protocol parameter. If the parameter settings are incorrect, image data may fail to be received.
    Suggestion: Ensure the the protocol parameter  is the same as that of the camera.
    Do you wish to continue?(y/n)y
    Command executed successfully.
     

System Response

None

Translation
Download
Updated: 2019-05-07

Document ID: EDOC1100067955

Views: 24147

Downloads: 7

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next