No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

OceanStor 9000 V5 7.0 Command Reference 03

Rate and give feedback :
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
show quota_switch

show quota_switch

Function

The show quota_switch command is used to query whether the release of file system quota is enabled.

Format

show quota_switch

Parameters

None

Level

Resource administrator

Usage Guidelines

Read-only users can also run this command to view information.

Example

To query whether the release of file system quota is enabled, run the following command.

admin:/>show quota_switch
 
  Enable : true

System Response

The following table describes the parameter meanings.

Parameter

Meaning

Enable

Flag indicating whether the release of file system quota is enabled.

Translation
Download
Updated: 2019-05-07

Document ID: EDOC1100067955

Views: 24731

Downloads: 7

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next