No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

OceanStor 9000 V5 7.0 Command Reference 03

Rate and give feedback :
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
show snapshot info

show snapshot info

Function

The show snapshot info command is used to query the information about the capacity used by a snapshot.

Format

show snapshot info < snapshot_id >

Parameters

Parameter

Description

Value

snapshot_id ID of the snapshot that you want to query.

The value is a number. You can run the "show snapshot" command to check the ID.

Level

Resource administrator

Usage Guidelines

Read-only users can also run this command to view information.

Example

Query the system capacity consumed by existing snapshots.

admin:/> show snapshot info 1
 
  ObjType       : 48 
  ObjId         : 1 
  TotalCapacity : 100 
  UsedCapacity  : 10 
  TimeStamp     : 2014-08-07/10:28:58 +08:00

System Response

The following table describes the parameter meanings.

Parameter

Meaning

ObjType

Snapshot type.

ObjId

Snapshot ID.

TotalCapacity

Available storage capacity.

UsedCapacity

Used capacity.

TimeStamp

Time when the snapshot was created.

Translation
Download
Updated: 2019-05-07

Document ID: EDOC1100067955

Views: 24702

Downloads: 7

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next