No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

OceanStor 9000 V5 7.0 Command Reference 03

Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
change object_storage_compatible_cold_switch

change object_storage_compatible_cold_switch

Function

The change object_storage_compatible_cold_switch command is used to configure OBS Warm and OBS Cold.

Format

change object_storage_compatible_cold_switch <warming_switch>

Parameters

Parameter

Description

Value

warming_switch This parameter is a string of eight digits. From left to right, the fifth digit controls whether to enable the function of stopping recording migration logs; the sixth digit controls whether to enable storage CDR conversion; the seventh digit controls whether to enable data archiving and storage; and the eighth digit controls whether to enable nearline and coldline storage. 0 indicates that the functions are disabled. 1 indicates that the functions are enabled. Other digits have no actual meaning.

The parameter consists of 8 digits. From left to right, the last four digits can only be 0 or 1. Each of the first four digits can be any number.

Level

Super administrator,Administrator

Usage Guidelines

After deploying and initializing clusters, users can run this command on the CLI to configure OBS Warm and OBS Cold.

Example

  • Example command used to enable OBS Warm and OBS Cold: change object_storage_compatible_cold_switch 11111111.

    admin:/>change object_storage_compatible_cold_switch 11111111
    Command executed successfully.
  • Example command used to disable OBS Warm and OBS Cold: change object_storage_compatible_cold_switch 00000000.

    admin:/>change object_storage_compatible_cold_switch 00000000
    Command executed successfully.

System Response

None

Translation
Download
Updated: 2019-05-07

Document ID: EDOC1100067955

Views: 25060

Downloads: 7

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next