No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

OceanStor 9000 V5 7.0 Command Reference 03

Rate and give feedback :
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
show iprule

show iprule

Function

The show iprule command is used to query existing IP rules.

Format

show iprule [ iprule_id=? ]

Parameters

Parameter

Description

Value

iprule_id IP rule ID.

The value is an integer between "0" and "31".

Level

Super administrator

Usage Guidelines

  • Run the show iprule [ iprule_id=? ] command to query a specific IP rule in the system.
  • Run the show iprule command to query information about all IP rules in the system.

Example

Query existing IP rules.

admin:/>show iprule
 
  IPRuleID SecureIP    Strategy
  -------- ----------- ---------------
  0        192.168.3.3 WHITE_NAME_LIST

System Response

The following table describes the parameter meanings.

Parameter

Meaning

IPRuleID

IP rule ID.

SecureIP

IP whitelist. The IP addresses that can access the snas_cm process.

Strategy

Rule strategy, enumeration value:

  • WHITE_NAME_LIST: whitelist,
  • BLACK_NAME_LIST: blacklist.
Translation
Download
Updated: 2019-05-07

Document ID: EDOC1100067955

Views: 24711

Downloads: 7

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next