No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

OceanStor 9000 V5 7.0 Command Reference 03

Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
create system nodepool

create system nodepool

Function

The create system nodepool command is used to create a node pool.

Format

create system nodepool < name > [ tier_id=? ] [ Spillover_to_nodepool=? ] [ capacity_threshold=? ] [ readonly_threshold=? ] [ recover_value=? ] [ recover_readonlyvalue=? ] [ Spillover=? ]

Parameters

Parameter

Description

Value

name name.

The value contains 1 to 127 letters, digits, hyphens (-), underscores (_), and periods (.) and must start with a letter and end with a letter or a digit.

tier_id Tier ID.

The value is an integer ranging from 0 to 31.

Spillover_to_nodepool Target node pool ID.

The value is an integer ranging from 1 to 32 or is 255. 255 indicates any node pool.

capacity_threshold High watermark alarm threshold.

The value ranges from 80 to 95, expressed in percentage.

readonly_threshold Read-only watermark alarm threshold.

The value ranges from 85 to 100, expressed in percentage.

recover_value High watermark recovery threshold.

The value ranges from 75 to 90, expressed in percentage.

recover_readonlyvalue Read-only watermark recovery threshold.

The value ranges from 80 to 95, expressed in percentage.

Spillover Whether to enable node pool migration.

enable: enables node pool migration.

disable: disables node pool migration.

If this parameter is set to enable, you need to configure Spillover_to_nodepool.

Level

Resource administrator

Usage Guidelines

The read-only watermark recovery threshold must be higher than the high watermark recovery threshold. The read-only watermark alarm threshold must be higher than the high watermark alarm threshold. The read-only watermark alarm threshold must be higher than the read-only watermark recovery threshold. The high watermark alarm threshold must be higher than the high watermark recovery threshold.

Example

Create a node pool.

admin:/>create system nodepool test spillOver=disable capacity_threshold=85
Command executed successfully.

System Response

None

Translation
Download
Updated: 2019-05-07

Document ID: EDOC1100067955

Views: 24900

Downloads: 7

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next